Replacing a Lehmann Lock Cylinder
Replacing a Lehmann lock cylinder is a
relatively simple process, but it requires a specific tool: the MLM Lehmann Cylinder Removal Key. Here's
how to do it:
Things you'll need:
- MLM Lehmann Cylinder Removal Key (available from Unico)
Steps:
- Ensure the lock is open: If
the lock is already open, you're good to go. If it's closed and you don't
have the original key, you’ll need the Lehmann Master Key to
open the lock. If you still can’t
open the lock then you may need to contact a locksmith to open it for you.
- Insert the MLM Lehmann Cylinder Removal Key: This key looks different from a regular key and is specifically
designed to remove Lehmann lock cylinders. Put the removal key into the
cylinder.
- Turn and remove the cylinder: Once
inserted, the removal key should allow you to turn it slightly. While
holding the key turned, gently pull out the cylinder from the lock body.
- Replace the cylinder: Take
your new Lehmann lock cylinder and insert it into the lock body. It should
slide in easily.
- Test the new cylinder: Put
your regular key in the new cylinder and turn it to check for smooth
operation.
Here are some additional points to consider:
- Where to buy the Lehmann Removal Key: The
Lehmann Removal Key can be bought from our website by clicking here.
- Lehmann cylinders: come
in different sizes 16.5mm and 18mm diameter. Make sure the replacement cylinder you
purchase matches your old one.
- Need help: If you're not comfortable doing this yourself, a locksmith can
replace the cylinder for you.
We hope this guide has been full of useful tips to make replacing 16.5mm and 18mm MLM Lehmann Cylinders as easy as possible.
We
have a wide range of 16.5mm and 18mm MLM Lehmann Cylinders available from stock, including Sets, Key Alike and Differs.
To purchase the Lehmann Cylinders online simply visit our website.