How to replace a 17mm or 27mm Drawer Runner
Replacing 17mm or 27mm Drawer Runners involves a few simple steps: 1. Gather tools and materials: You'll need a screwdriver, the new drawer runners, and potentially some screws depending on your situation (usually the screws from the old runners will be sufficient). 2. Remove the drawer: Fully extend the drawer and remove the 4mm screw inside the drawer that secures the runners in place. Complete for both runners and remove the drawer from the cabinet. 3. Remove the old runners: On the cabinet side, there will be screws holding the runner in place. Unscrew them and detach the runner. Repeat on the other side for both runners. 4. Install the new runners: Line up the new runner with the existing holes and secure it with the screws you removed earlier. Tighten them firmly but not excessively. Repeat for both sides. 5. Reinstall the drawer: Slide the drawer back into the opening, line up the hole for the 4mm screws with the hole in the drawer runne